Metric steel fasteners are often marked with property classes such as 8.8, 10.9 and 12.9. These markings describe mechanical-property levels for applicable carbon and alloy steel fasteners; they are not thread sizes and they should not be treated as a simple quality ranking.
Quick answer: The first number is related to the nominal ultimate tensile-strength level defined by the property-class system.
What to know about bolt strength grades 8.8 10.9 12.9
Design and function
The first number is related to the nominal ultimate tensile-strength level defined by the property-class system.
Fit and compatibility
The second number relates yield or proof behavior to tensile strength and helps define usable loading.
Material and service
A stronger bolt can move the failure point into a weak nut, tapped hole or parent material.
Installation considerations
Mechanical strength and corrosion resistance are separate requirements; finish and material still matter.
How to choose the right fastener
- Start with the mating thread: confirm nominal diameter and pitch before anything else.
- Check the physical envelope: confirm length, head clearance and available tool access.
- Match the environment: choose material and finish for moisture, chlorides, chemicals and mating metals.
- Review the joint: account for vibration, repeated servicing, soft materials and any locking requirement.
- Control the specification: record the approved dimensions, material, finish and standard for repeat purchasing.
Practical selection checklist
| Check | Question | Why it matters |
|---|---|---|
| Thread | Does diameter and pitch match? | Prevents cross-threading and poor engagement |
| Length | Is engagement correct without bottoming? | Controls clamp and clearance |
| Head/drive | Does it fit the part and tool? | Controls seating and service access |
| Material | Is it suitable for the environment? | Controls corrosion and mechanical suitability |
| Documentation | Is a standard or certificate required? | Supports repeatable procurement |
How to verify the specification before ordering
Measure or confirm the actual mating feature rather than relying only on an old sample or photograph. Use calipers and a thread-pitch gauge where practical, compare the result with the approved drawing, and check the installed head position and tool clearance. A replacement can have the same nominal diameter yet still be wrong because of pitch, head geometry, length, material or finish.
For a new production part, validate a small quantity before committing to a large order. Assemble the fastener by hand first, check seating and interference, inspect the mating thread after removal, and review any required markings or material documents. Safety-critical dimensions, torque values and load limits should come from the current engineering specification or manufacturer documentation.
Common mistakes to avoid
- Do not choose 12.9 automatically when 8.8 is specified.
- Do not directly equate stainless material names such as SS304 with carbon-steel property classes.
- Match the nut or tapped thread to the required fastener strength.
- Use the drawing, current standard and approved tightening procedure for loaded joints.
Recommended products and categories
grade 12.9 grub screw, shop grub screws, hex bolts.
Technical references
Use current standards, engineering drawings and manufacturer data as the final authority for safety-critical or load-critical work.
Frequently asked questions
What should I confirm first?
Confirm the mating thread, required length and head or drive geometry before choosing material or finish.
Can a visually similar fastener be substituted?
Only after confirming thread, dimensions, material, mechanical requirement, finish and the applicable standard. Similar appearance does not prove equivalence.
When should I ask for technical documentation?
Request it before ordering whenever material traceability, mechanical properties, compliance or a safety-related specification matters.
Related reading
Final buying checklist
- Confirm thread diameter and pitch.
- Confirm length and measuring reference.
- Check head, drive and tool access.
- Match material and finish to the environment.
- Confirm strength, locking and documentation needs.
Ready to select a part? Browse our Screws, Nuts & Bolts catalogue.